Welcome to Zeny
Cart 0
ZENY™ 2in1 SMD Soldering Rework Station Hot Air & Iron 852D+

ZENY™ 2in1 SMD Soldering Rework Station Hot Air & Iron 852D+

$ 60.00 $ 129.00

  • 1. SAMSUNG microcomputer control,warming-up quickly.
  • 2. Adjust the air flow and temperature control rotation.
  • 3. Refer to the instructions included with three kinds of nozzles (big,medium and small) replacement
  • 4. Would replace the part if the resistance value is incorrect.
  • 5. Safe solder QFP, PLCC, BGA and other temperature-sensitive components.

  • Note: There's a sticker on the top of the item which it says on the sticker to caution: remove the screw from the pump from the bottom of the station before using, fail to remove will result in serious problem.
    tures:
    1. SAMSUNG microcomputer control,warming-up quickly.
    2. Adjust the air flow and temperature control rotation.
    3. Refer to the instructions included with three kinds of nozzles (big,medium and small) replacement part.
    4. Would replace the part if the resistance value is incorrect.
    5. When the temperature is less than 70 degree, can stop rotation automatically.
    6. Intelligent system that could alarm, Fault detection automatically
    7. High-quality resistance good for long service life
    8. Safe solder QFP, PLCC, BGA and other temperature-sensitive components.
    9. Intelligent detection and cool airflow features.
    10. Green lines and high-quality silicone body heat good for extend life and save power.
    11. Small housing make most area saving.
    12. Add main switch of power supply to protect the whole machine.
    Specification:
    Power Voltage: 110V
    Power Consumption: 700W (Max.)
    Pump: Diaphragm Pump
    Capacity: 24L/min (Max.)
    Leakage Voltage of Iron Tip: <0.5mV
    Standard Iron Tip: AT-900M
    Hot Air Temperature: 100 to 500C
    Tip of Iron Temperature: 200 to 500C
    Outer Dimensions: 187(W)x150(H)x245(D)mm
    Weight: Around 4 Kilo with Packing
    Packing included:
    Rework station with Air Output
    Rework tray
    Soldering iron holder
    Soldering iron
    Soldering Iron Foam
    4 Nozzles (Ø3mm, Ø5mm, Ø7mm, Ø10mm)for versatile applications 5 Tips (900M-T-I, B, K, 3C,4D) for more convenience operation

  • Share this Product